In 2026, AMD Machines quoted an automatic three-camera vision inspection and sorting cell for small cylindrical metal parts at $200,000–$260,000, including design, build and debug, programming, manuals, and freight with insurance to the buyer's plant, taxes excluded; the quote also covers a 24–48 hour installation and runoff. The cell takes parts straight from an upstream press, holds their orientation, lifts each part into a camera station, measures its outside diameter, inside diameter and height, checks it for assembly and cosmetic defects, and sorts it to OK or scrap at 12 parts per minute.
The same AMD Machines cell concept fits bushings, sleeves, ferrules and spacers, and more broadly sintered bearings, hydraulic and pneumatic fittings, threaded nuts and inserts, appliance and HVAC tube fittings, bearing races and pins, and small sleeves for electrical assemblies. Prices are ranges from AMD Machines' 2026 quote. For the full range of inspection, measurement and guidance work we engineer, see our machine vision systems page. For production configurations of the same idea, see AMD Machines' machine vision inspection stations.
A vision inspection and sorting cell is a machine that presents each part to one or more cameras in a fixed position, measures and checks it against set limits, and diverts every part automatically to an OK exit or a reject container, with no operator judgment in the pass/fail decision. The AMD Machines cell in this case study does that for seven variants of one part family on one machine.
| Item | AMD Machines vision inspection and sorting cell |
|---|---|
| Part family | Small cylindrical metal parts: bushings, sleeves, ferrules, spacers; seven variants on one machine |
| Infeed | Straight from an upstream press, orientation held by guides along the conveyor |
| Inspection | Three Keyence cameras: outside diameter, inside diameter, height, assembly and cosmetic defects |
| Rate | 5 seconds per part, 12 parts per minute |
| Volume | Several million parts a year, three shifts, one operator |
| Footprint | About 4 ft 11 in L × 3 ft 11 in W × 6 ft 3 in H (1.5 × 1.2 × 1.9 m) |
| Price | $200,000–$260,000 with freight and insurance to the buyer's plant, taxes excluded |
| Lead time | 13–15 weeks from purchase order |
What Is in This Vision Inspection and Sorting Cell?
AMD Machines designs the cell as a compact, self-contained machine: an infeed conveyor with orientation guides, a positioner, a servo elevator that lifts each part into a separate camera structure, a rotating clamp under the cameras and a pneumatic ejector that sorts the part. AMD Machines specifies the equipment by brand and model in the quote:
| System | In the AMD Machines cell |
|---|---|
| Cameras | Two Keyence VS-S160MX (inside diameter, surface and cosmetic defects) and one Keyence VS-S500MX (height and outside diameter) |
| Elevator | Festo servo actuator that lifts the part into the inspection area and lowers it to unload |
| Part rotation | Motor with encoder that rotates the clamped part under the cameras |
| Pneumatics | Festo cylinders for press-outlet transfer, positioner, elevator loading, clamping and eject; Festo FRL unit and valve manifold |
| Controls | Allen-Bradley CompactLogix L330ERS2 PLC and Allen-Bradley PanelView Plus 7 10-inch HMI, Ethernet communication |
| Sensors | Keyence presence sensors at the vision station, the OK exit and the scrap box |
| Safety | Allen-Bradley 440N interlock on the guarding, Allen-Bradley safety relay, E-stop, start-cycle push buttons |
| Structure | Aluminum structural profile frame with polycarbonate guarding, a separate profile structure carrying the cameras, leveling pads, a stack light and a status lamp |
How Much Does a Vision Inspection Cell Cost?
AMD Machines quoted the cell at $200,000–$260,000 in US dollars, taxes excluded. The quote prices it as one line, with no separately priced options:
| Line in the AMD Machines quote | Price range |
|---|---|
| Three-camera vision inspection and sorting cell: design, build and debug, programming, manuals, and freight with insurance to the buyer's plant | $200,000–$260,000 |
| Total, with freight and insurance, taxes excluded | $200,000–$260,000 |
The AMD Machines price also covers a 24–48 hour installation and runoff at the buyer's plant and validation at AMD before shipment (see what the quote includes, below).
How Does This Cell Compare With AMD's Published Ranges?
AMD Machines' guide to what automation costs lists custom automation as "(focused single station → multi-station line)" at "~$100K – $1.5M+". At $200,000–$260,000, this AMD Machines cell sits near the focused single-station end of that range: one inspection station, one elevator, three cameras and a two-way sort, with seven variants handled by the same hardware.
What Are the Payment Terms for a Vision Inspection Cell?
AMD Machines' payment terms for this cell are 35% with the purchase order, 35% at design approval, 20% at acceptance at AMD and 10% at acceptance at the buyer's plant, net 60 days. AMD Machines warrants the parts it builds for 12 months; purchased components carry their makers' warranties.
What Moves the Price of a Vision Inspection Cell?
These choices move the price of a vision inspection and sorting cell more than anything else:
- Camera count and resolution. Each feature to measure or defect to find may need its own camera, lens and lighting. This AMD Machines cell uses three.
- How the part is presented. A part checked on a moving conveyor is cheaper to handle than one lifted, clamped and rotated, but the cameras see less of it.
- Number of variants. Seven variants on one AMD Machines cell work here because orientation is held by guides, not changed with tooling. Variants that need their own fixtures add changeover hardware.
- Sort outputs. A two-way OK/scrap sort is the simplest. Sorting by size class or defect type adds ejectors, slides and bins.
- Measurement tolerance. Tolerances tighter than the cameras resolve call for a dedicated gauge alongside, or instead of, camera measurement.
- Infeed. Taking parts straight from an upstream press saves a bowl feeder or an operator; bulk parts in bins would need a feeder.
When Is Vision Gauging Enough, and When Do You Need a Dedicated Gauge?
The camera choice sets what the cell can measure. Per the camera supplier's guidance in the AMD Machines quote, the Keyence VS-S160MX resolves about 0.02 in (about 0.5 mm) and the VS-S500MX about 0.004 in (about 0.1 mm). At those resolutions the AMD Machines cell is the right tool for sorting and defect detection: catching wrong sizes, missing features, assembly errors and cosmetic defects on every part at production rate.
When a part's dimensional tolerances are tighter than that, AMD's engineering team recommends a dedicated measurement system rather than asking cameras to do the job. Laser micrometers and contact gauges are common examples of such systems. That is the most important question to settle before you request a quote: list your dimensions with their tolerances, and the right split between camera checks and gauging follows from them. For how the methods compare, see our guide to dimensional inspection with CMMs, vision and laser scanning.
AMD's engineering team also splits the camera roles by resolution: the higher-resolution VS-S500MX takes height and outside diameter, and the two VS-S160MX cameras take the bore and the surface and cosmetic checks.
Why Lift Each Part Out of the Conveyor to Inspect It?
AMD's engineering team takes the inspection station out of the conveyor flow. Each part rides a servo elevator up into the camera area, where it is clamped and rotated by a motor with encoder. That gives two things a conveyor-top camera cannot:
- The cameras see the whole part. Rotation under the cameras exposes the full circumference, and the clamped, lifted part presents both diameters and its height to fixed cameras in the same position every time.
- Every measurement is taken in the same place. The part is clamped in the same position under the cameras for every measurement, part after part and variant after variant.
A separate profile structure carries the cameras, so they sit on their own frame. For more on covering a part from several angles, see our guide to multi-camera vision systems for complete inspection.
How Does the Cell Keep Seven Part Variants Oriented?
In the AMD Machines cell, orientation is controlled from the press outlet onward. AMD's engineering team places guides at the entry and along the conveyor, so a part leaves the press, enters the cell and reaches the elevator the same way up every time, and orientation is never lost. Because every variant arrives the same way, the seven variants run on the same machine without re-orienting hardware.
How Does the Vision Inspection Cycle Run, Step by Step?
The AMD Machines cell runs each part through four steps:
- Guides capture the part's orientation at the press outlet and hold it along the conveyor, so every variant arrives the same way.
- At the end of the conveyor, a positioner sets the part at the elevator's clamping point.
- The servo elevator lifts the part into the inspection area, where it is clamped and rotated by a motor with encoder while the three cameras measure outside diameter, inside diameter and height and check for assembly and cosmetic defects.
- The elevator lowers the part to the unload position, and a pneumatic ejector sends it down the OK slide or into the scrap container.
AMD Machines designs the cell for 5 seconds per part, 12 parts per minute, with one operator, for several million parts a year on three shifts.
Which Parts and Industries Does This Vision Inspection and Sorting Cell Fit?
AMD Machines' cell concept fits small round or cylindrical parts that leave a press or a machine in a known orientation and need every part measured and checked, across general manufacturing, fluid power and off-highway equipment, appliances and HVAC, power transmission and electrical assemblies:
| Part family or application | Why it fits | What would change |
|---|---|---|
| Powdered-metal and sintered bushings and plain bearings | Small cylindrical parts with bore, outside diameter and height to check | Tooling for flanged and unflanged parts; lighting for porous surfaces |
| Hydraulic and pneumatic fittings, ferrules and sleeves for fluid power and off-highway equipment | The same lift, clamp and rotate presentation | Thread or chamfer checks; backlighting for bores |
| Spacers, inserts and threaded nuts | High-volume small parts with a simple OK/reject decision | Higher rates with a faster eject; a thread-presence check |
| Tube fittings and sleeves for appliances and HVAC | The same orientation-held infeed | Larger diameter and length tooling; cosmetic criteria |
| Small bearing races and pins for power transmission | The same camera station for defect checks | Tighter tolerances may call for laser or contact gauging instead of camera measurement |
| Small machined or stamped sleeves for electrical and electromechanical assemblies | The same sorting cell | A smaller size class and field of view |
For these industries, see AMD Machines' general manufacturing automation, appliance manufacturing automation and heavy equipment manufacturing automation pages. Each row follows from the same process, size class and material as the AMD Machines cell.
What Safety Does a Vision Inspection Cell Need?
The elevator, clamp, rotation and ejector all move inside the guarding. AMD Machines encloses the cell in polycarbonate guarding interlocked through an Allen-Bradley 440N switch and an Allen-Bradley safety relay, with an E-stop and start-cycle push buttons.
In your request for quote, specify UL 508A control panels and NFPA 79 machine wiring.
What Does the Vision Inspection Cell Quote Include and Leave Out?
The AMD Machines quote includes:
- the machine, with design, build, debug and programming
- freight with insurance to the buyer's plant
- a 24–48 hour installation and runoff at the plant
- validation at AMD in Querétaro: an empty-cycle test, a 300-part production run and a checklist
- documentation: the layout, mechanical drawings of spare parts, the PLC program, operating and maintenance manuals, a recommended spare-parts list and pneumatic diagrams
- a 12-month warranty on AMD-built parts, with purchased components under their makers' warranties
The quote leaves out:
- taxes
- unloading and placing the machine at the plant
- electrical and air supply at the plant
- customer-specific validation beyond the standard runoff, which may cost extra
- scope changes after the project launches
How Long Does It Take to Build a Vision Inspection Cell?
AMD Machines' lead time for this cell is 13–15 weeks from the purchase order, depending on workload. To hold that schedule, AMD Machines asks for drawing approval within 24 hours.
For comparison, AMD Machines' published lead times are "simple machines in as little as 6 weeks; complex systems in 24–26 weeks that would take a typical overseas supplier 40–42." A single-station inspection and sorting cell sits between the two. See our custom automation lead times for what sets the schedule.
What Should You Send to Get a Vision Inspection Cell Quoted?
AMD Machines quotes an inspection cell from your parts and your limits. With the order, AMD Machines asks for drawings of every part, 50 samples of each variant, 2D and 3D CAD, your plant's machine standards (otherwise AMD's apply) and a paint color. To get the quote itself, send:
- drawings and CAD for every variant, with the dimensions to check and their tolerances
- the defects you need to catch, with photos or sample parts showing them
- the number of variants
- your rate and annual volume
- how parts arrive: from a press or machine, or in bulk
- how many sort outputs you need
Vision Inspection Cell FAQ
How much does a vision inspection and sorting cell cost?
A three-camera vision inspection and sorting cell for small cylindrical metal parts costs $200,000–$260,000 in a 2026 AMD Machines quote, with design, build, programming, manuals and freight with insurance to the buyer's plant, taxes excluded. The AMD Machines price includes a 24–48 hour installation and runoff.
Can a vision system replace a gauge for measuring diameters and height?
For sorting and defect detection, yes. In the AMD Machines quote, the cameras resolve about 0.02 in and 0.004 in. When tolerances are tighter, AMD's engineering team recommends a dedicated measurement system; laser micrometers and contact gauges are common examples.
How fast can a vision inspection cell sort parts?
AMD Machines designs this cell for 5 seconds per part, 12 parts per minute. A faster eject can raise the rate for spacers, nuts and inserts.
Can one vision cell inspect several part variants?
Yes. The AMD Machines cell runs seven variants of one part family because guides hold each part's orientation from the press outlet to the camera station, so no variant needs re-orienting hardware.
If you're budgeting a vision cell for bushings, sleeves, fittings, spacers or other small round parts, send us your drawings and samples and AMD Machines will tell you what cameras can check, where a gauge fits, and what it costs.