In 2026, AMD Machines quoted an automatic stamp-and-insert machine at $250,000–$320,000 for the machine, or $270,000–$340,000 with optional insured freight to the buyer's plant and one week of on-site commissioning, taxes excluded. One machine forms small metal contacts from coil strip in a servo-driven progressive die and presses each one into a molded plastic housing on a rotary index table, at an estimated 4 seconds per part.
The same machine concept fits many two-piece parts where a formed metal contact goes into a plastic body: connector pins and wire-harness terminals, thermostat, switch and sensor contacts in appliance and HVAC controls, fuse-box and lighting-socket terminals, relay and battery contacts, grounding clips in sensors and small motors, and metal clips pressed into plastic hardware. For the full range of assembly machines we engineer, see our automated assembly systems page, and for configurations built around your part, see AMD Machines' custom automated assembly machines.
A terminal insertion machine is an assembly machine that cuts and forms metal contacts from a reel of flat strip and presses each contact into a molded plastic housing, turning coil stock and loose housings into finished two-piece subassemblies in one continuous cycle. The AMD Machines machine in this case study does both the stamping and the insertion, so no loose terminal is ever handled between them.
| Item | AMD Machines stamp-and-insert machine |
|---|---|
| Part family | A small formed sheet-metal contact or terminal, cut and bent from flat strip on a reel, pressed into a small molded plastic housing |
| Forming | Progressive die driven by a Kistler 2164A servo press, fed from a motorized decoiler |
| Housing feed | Vibromatic vibratory bowl feeder with a pneumatic escapement |
| Transfer | Weiss TC120G-4-F 4-position index table, 4 machined nests, 3 rotary pick-and-place units |
| Insertion | Pneumatic assembly press |
| Rate | An estimated 4 seconds per part, 900 parts per hour |
| Controls | Allen-Bradley CompactLogix 5380 PLC, PanelView 7-inch HMI, IO-Link distributed I/O |
| Price | $250,000–$320,000 machine; $270,000–$340,000 with freight and commissioning, taxes excluded |
| Lead time | 22–24 weeks from purchase order |
What Is in This Terminal Insertion Machine?
AMD Machines designs the machine around a welded steel main frame with a base plate, with a separate welded stand for the bowl feeder and a separate welded structure for the decoiler. The quote names the equipment by brand and model:
| System | In the AMD Machines machine |
|---|---|
| Frame and guarding | Welded steel main frame with base plate; separate stands for the bowl feeder and the decoiler; 8 leveling pads; aluminum-profile guard with polycarbonate panels |
| Strip supply | Motorized decoiler with 2 Oriental Motor stepper motors, a roller clamp and a pneumatic tension buffer (dancer) |
| Forming | 1 progressive die driven by a Kistler 2164A servo press; 2 pneumatic strip feeders |
| Housing feed | Vibromatic vibratory bowl feeder on its own steel stand; 1 pneumatic isolator (escapement) |
| Transfer | Weiss TC120G-4-F index table, 4 positions, aluminum indexing plate, 4 machined nests; 3 rotary pick-and-place units |
| Insertion | 1 pneumatic assembly press |
| Pneumatics | SMC filter-regulator-lubricator; 18 valves on a manifold; 6 grippers; 3 rotary cylinders; linear cylinders for the tension buffer, decoiler, isolator, pick-and-place and press |
| Controls | Allen-Bradley CompactLogix 5380 PLC with I/O in the main control cabinet; Allen-Bradley PanelView 7-inch HMI in its own cabinet; IO-Link with 1 master and 4 slave modules; 24 VDC control |
| Sensing | 8 part-present sensors at the pick-and-place, 3 on the coil, 30 magnetic position sensors on cylinders and grippers |
| Safety | 4 safety interlocks on the guard access doors, 4 emergency stops, 4 safety relays |
| Signals | Stack light and station work lamp |
How Much Does a Terminal Insertion Machine Cost?
AMD Machines quoted the machine at $250,000–$320,000, and $270,000–$340,000 with the two optional lines, taxes excluded. The quote prices it in three lines:
| Line in the AMD Machines quote | Price range |
|---|---|
| Machine: decoiler, progressive die, servo press, bowl feeder, index table, insertion press, controls and guarding (table above) | $250,000–$320,000 |
| Optional: insured freight to the buyer's plant | $5,000–$7,000 |
| Optional: one week of on-site commissioning | $9,000–$13,000 |
| Total, with freight and commissioning | $270,000–$340,000 |
The buyer can take AMD Machines' insured freight line or send its own carrier.
How Does This Machine Compare With AMD's Published Ranges?
AMD Machines' guide to what automation costs lists a "Custom assembly machine" at "~$100K – $2M+". At $270,000–$340,000 with freight and commissioning, this AMD Machines machine sits in the lower part of that range: two processes, forming and insertion, share one frame and one control system.
What Are the Payment Terms for a Terminal Insertion Machine?
AMD Machines' payment terms for this machine are 40% with the purchase order, 30% at design approval, 20% at acceptance at AMD and 10% at acceptance at the buyer's plant.
What Moves the Price of a Terminal Insertion Machine?
These choices move the price most:
- The die. The number of forming stages and the contact geometry set the progressive die, and the forming force sets the press.
- Contacts per housing. Several pins need several insertions or a multi-pin carrier.
- Rate. A faster target may need a faster dial or a dual-lane die.
- Variants. More part variants mean quick-change die inserts and nests.
- Inspection. An insertion-depth check, a continuity or resistance test or a vision check of the pins adds scope.
Why Form the Contacts In-Line From Coil?
AMD Machines designs the machine to form each contact from the strip just before it is inserted. Buying loose formed terminals instead means handling small springy parts that tangle and must be re-oriented before every insertion. Forming in-line removes that step: the contact is cut off the strip at the die, in a known position, and a pick-and-place unit carries it to the housing.
Strip control comes first in the AMD Machines design. The motorized decoiler, with its two stepper motors, a roller clamp and a pneumatic tension buffer, keeps strip tension steady between the reel and the die feed, so every stroke progresses the strip consistently through the die.
Why Does a Servo Press Drive the Progressive Die?
AMD's engineering team asks for the contact's forming force before it sizes the press. For this contact the working estimate is about 2.2 US tons (about 2 metric tons) to form, with the final value depending on the die design, and AMD Machines sizes a force-rated Kistler servo press to drive the progressive die.
A servo press gives a progressive die three things a fixed-stroke press does not: a programmable stroke, a programmable speed, and a force-versus-position signal on every hit. That signal supports in-process monitoring of the forming, so a stroke that does not look like the good ones can be caught at the die. For more on servo press selection and monitoring, see AMD Machines' servo press integration page and our guide to press-fit process control and monitoring.
How Does the Machine Keep Housings, Parts and Signals Under Control?
Four features in the AMD Machines design keep the cycle steady:
- One housing at a time. The pneumatic escapement after the bowl feeder separates the housings, so the pick-and-place always takes a single oriented part.
- A four-position dial. The Weiss index table carries 4 machined nests, so loading, insertion and unloading happen at fixed stations between indexes, at an estimated 4-second cycle.
- Separate stands. The bowl feeder and the decoiler sit on their own welded stands, which keeps feeder vibration and coil handling apart from the main frame and the index table.
- IO-Link wiring. The machine spreads its sensors across the decoiler, die, feeder and dial. IO-Link distributed I/O, with one master and four slave modules, cuts the field wiring back to the main cabinet.
For a sibling AMD Machines design on a rotary indexer, see the screwdriving machine cost case study.
How Does the Stamp-and-Insert Cycle Run, Step by Step?
The AMD Machines machine runs each part through six steps:
- The motorized decoiler unwinds the flat strip from its reel, and the tension buffer holds tension steady.
- The two strip feeders advance the strip through the progressive die. The servo press forms the contact in several stages and cuts it off to final shape.
- The vibratory bowl feeder orients the molded plastic housings, and the escapement releases them one at a time.
- The rotary pick-and-place units place the housing and the formed contact in a nest on the index table.
- The pneumatic assembly press seats the contact into the housing.
- The finished subassembly leaves the machine down the unloading chute.
Which Parts and Industries Does This Terminal Insertion Machine Fit?
AMD Machines' stamp-and-insert concept fits small contacts formed from flat strip and pressed into molded plastic parts. What would change for each:
| Part family or application | What would change |
|---|---|
| Electrical connectors and wire-harness terminals (pins or blades into a connector body) | More contacts per housing, through several insertions or a multi-pin carrier; a tighter insertion-depth check; possibly a vision check of the pins |
| Appliance and HVAC controls: thermostat, switch and sensor contacts into plastic bases | Die geometry for spring or blade contacts; possibly a resistance or continuity check |
| Automotive non-safety electrical parts: fuse-box terminals, sensor or switch housings, lighting sockets | A higher volume may need a faster dial or a dual-lane die; traceability marking |
| Electrical devices: wiring-device contacts, relay or switch terminals, battery contacts for consumer products | Thinner spring materials; plating-safe handling |
| Industrial sensors and small motors: grounding clips, brush or spring contacts into molded holders | Lower volume with more variants: quick-change die inserts and nests |
| Hardware: spring clips or metal inserts formed from strip and pressed into plastic parts | A higher insertion force and a larger press; a different feeder for bulky housings |
For these industries, see AMD Machines' electronics manufacturing automation, appliance manufacturing automation and automotive manufacturing automation pages.
What Safety Does a Terminal Insertion Machine Need?
AMD Machines encloses the machine in an aluminum-profile guard with polycarbonate panels and 4 interlocked access doors, places 4 emergency stops at the operator positions, and uses 4 safety relays to monitor the emergency stops and the door interlocks.
In your request for quote, specify UL 508A control panels and NFPA 79 machine wiring.
What Does the Terminal Insertion Machine Quote Include and Leave Out?
The AMD Machines quote includes design, build and debug, PLC and HMI programming, and a documentation package: the machine layout, manuals for the purchased components, an operating manual, spare-part drawings and a spare-parts list, a copy of the PLC program, a maintenance program and the pneumatic diagram.
Validation at AMD in Querétaro comes before shipment: a dry run, a 300-part production lot and an acceptance checklist. AMD Machines evaluates any buyer-specific validation needs and may quote them extra. Once the machine sits in place with power and air connected, AMD Machines' on-site installation takes 24–48 hours; the buyer places the machine and supplies the utilities. The 12-month warranty covers parts AMD designs and builds, and purchased components carry their makers' warranties.
The quote leaves out:
- taxes
- changes after the project launch, or deviations from the drawings and samples, which are quoted separately
How Long Does It Take to Build a Terminal Insertion Machine?
AMD Machines' lead time for this machine is 22–24 weeks from the purchase order, depending on AMD's workload at the time.
For comparison, AMD Machines' published lead times are "simple machines in as little as 6 weeks; complex systems in 24–26 weeks that would take a typical overseas supplier 40–42." With its own progressive die, servo press, bowl feeder and index table, this machine sits near the complex end. See our custom automation lead times for what sets the schedule.
What Should You Send to Get a Terminal Insertion Machine Quoted?
AMD Machines quotes a stamp-and-insert machine from your parts and specification. Send:
- the strip material, thickness and width
- the coil or reel size
- the formed contact drawing
- the housing drawing and material
- the force to form the contact and the force to insert it
- your target rate
- your part variants
With the order, AMD Machines asks for full drawings of every component, 2D and 3D CAD in SolidWorks or AutoCAD, a large quantity of production-quality samples of each component to tune the die and the feeder, your machine standards (otherwise AMD's apply) and a paint color.
Terminal Insertion Machine FAQ
How much does a terminal insertion machine cost?
A stamp-and-insert machine that forms contacts from coil and presses them into plastic housings costs $250,000–$320,000 in a 2026 AMD Machines quote, taxes excluded. Optional insured freight adds $5,000–$7,000 and one week of on-site commissioning adds $9,000–$13,000, for a total of $270,000–$340,000.
How fast is a stamp-and-insert machine?
AMD Machines estimates this machine at 4 seconds per part, or 900 parts per hour, on a 4-position index table.
Why stamp the terminals on the machine instead of buying them loose?
Forming each contact from the strip just before insertion removes the handling, tangling and orientation of loose terminals. In the AMD Machines design, the contact leaves the progressive die in a known position and goes straight to the housing.
If you're budgeting a machine that forms contacts, terminals or clips and presses them into plastic parts, send us your drawings and rate and AMD Machines will tell you how it would build it and what it costs.